Furitek FUR-2531 Torpedo Brushless Power System for RedCat Ascent-18

Description

Description

FURITEK TORPEDO BRUSHLESS POWER SYSTEM FOR REDCAT ASCENT-18

NOTE: Slight modification of the motor mount holes on the stock transmission may be required to get a proper mesh

PYTHON PRO ESC Features:

– FOC (Field-Orientated control) technology

– Live tunning on Furicar app

– Super slow and ridiculously smooth throttle control

– New firmware algorithm to consistently smooth up the start up to FOC stage

– Work with Brushed/Brushless motors (config via app, default is brushless)

– BIG BEC for power-hungry servos

– Mini size and light weight

– Super easy programming via App on both Android and iOS

– Real-time telemetry up to 10Hz

– Bluetooth module built-in so no longer a separate wires and bluetooth module controlled by Furicar App

– Waterproof and dustproof with an enclosing CNC aluminum case

– Circuit protection

– FREE lifetime firmware updates

PYTHON PRO Specifications:

– Supports 2-4S lipo batteries

– BEC: 5.5V/7.4V/8.4V 5A

– Constant current: 40A

– Burst current: 70A

– Built-in power switch

– Dimensions: 1.57x 0.78x 0.6 (inch), 40x20x15 (mm)

– Weight: 5.7g (0.2oz)

CEDAR motor Features:

– Special designed 12-Pole Inrunner brushless motor for most efficiency

– Waterproof design

– Dustproof design

– Small, compact, easy to be installed in tight spaces

– Stylish with aluminum case, anodized with red and black

– Super quiet, high torque, powerful and super slow speed yet tons of wheel speeds when needed

– Steel pinion included for REDCAT ASCENT-18 crawlers

– High purity and higher temperature copper windings -lower copper losses, very good heat dissipating-maximizes efficiency.

– Super thin (0.2mm) stator laminations—lower eddy losses—maximizes efficiency. High RPM ABEC5 bearings.

– Precision balanced rotor, smoothness for best reliability, and maximum RPM. CNC machined 6061 T6 billet aluminum heatsink can.

– Precision engineered for maximum energy conversion

– All hardware included

CEDAR motor Specifications:

– Motor type: Inrunner

– KV: 3456KV­­

– No-load current @10V: 07A

– Power: 120W

– Battery: 2-3S Lipo

– Resistance: 0.17Ohm

– Slot/Pole: 12-Pole

– Motor size: 18x25mm diameter (0.7 x 1inch)

– Weight: 20g (0.7oz)

Extra requirement:
– Require external RX/TX. If you want to run with Stock TX. Let use SKU: FUR-2525 or FUR-2530