Name: Flotide Heat Pump Hose Tail Adaptor Pair (x2) 1.5" to 32/38mm Push Fit
SKU: RXXO56949102656
Price: 7.92 USD
Availability: InStock

Flotide Heat Pump Hose Tail Adaptor Pair (x2) 1.5″ to 32/38mm Push Fit

SKU: RXXO56949102656 Category: hot sale

Description

Pair of Hose Tail Adaptors for Flotide Heat Pumps

2 adaptors included one for the inlet, one for the outlet. Everything you need to connect your Flotide heat pump to standard 32mm or 38mm push-fit pool hoses.

These screw directly into the inlet and outlet ports of any Flotide S, A, X, or SX range heat pump (and most other heat pumps with G1-1/2″ ports), giving you a stepped hose tail that accepts standard push-fit pool hoses.

You Need These If

You have a Flotide S5, S7, S10, A5, A7, A10, X11, X14 or any heat pump with 1.5″ threaded ports
Your pool uses 32mm or 38mm push-fit hoses (the smooth hoses that come with Intex, Bestway, and most above-ground pools)
You want a simple, secure push-on connection

How It Works

Screw one adaptor into your heat pump’s inlet port and one into the outlet port (1.5″ male thread)
Use PTFE tape on the threads for a watertight seal
Push your 32mm or 38mm hose onto each stepped hose tail
Secure with jubilee clips (hose clamps) for a leak-free connection
Done you’re plumbed in!

Not Sure Which Adaptor You Need?

This adaptor (32/38mm Hose Tail)	For 32mm or 38mm push-fit hoses (the smooth hoses that come with most above-ground pools). Push on and secure with a jubilee clip.
2″ Threaded Adaptor Pair	For 2″ (50mm) nut-type threaded hoses typically used with sand filter systems. Screws on with a threaded nut fitting.

Only need one? Buy a single 32/38mm hose tail adaptor here.

Specifications

Quantity	2 (pair inlet & outlet)
Heat Pump Side	G1-1/2″ (1.5″) male thread
Hose Side	Stepped hose tail fits 32mm and 38mm push-fit hoses
Material	PVC
Pressure Rating	10 bar
Colour	White
Compatible Heat Pumps	All Flotide S, A, X, SX range + any with G1-1/2″ threaded ports